Nach Freischalten von "WiFi" keine (eth0) LAN-Verbindung mehr
Verfasst: 20. Feb 2019 23:22
Hallo zusammen,
nachdem ich auf dem Raspberry die Wlan-Verbindung in openhabian-config freigeschaltet
habe ist das gleiche Problem wieder aufgetreten das bereits bei einer vorherigen
Neuinstallation von "openhabian" mit sofortiger installation des "WiFi" vorlag.
Bei einem Neustart wird "eth0" nicht erkannt/angezeigt.
Mit "ipconfig eth0" kann ich die IP-Adresse setzten und der Pi wird
erkannt und kann mit "ssh" aus dem Netz bearbeitet werden.
Einen Eintrag in "/etc/dhcpd.conf" hat keinen Erfolg.
Nach einem Neustart ist nur "wlan0" zu sehen
Vielleicht kann mir jemand helfen und sagen was ich noch einstellen kann!
Mit freundlichen Grüßen
Jürgen
###############################################################################
############### oha2 ########################################################
###############################################################################
## Ip = 192.168.2.13
## Release = Raspbian GNU/Linux buster/sid
## Kernel = Linux 4.14.79-v7+
## Platform = Raspberry Pi 3 Model B Plus Rev 1.3
## Uptime = 0 day(s). 3:8:44
## CPU Usage = 0.5% avg over 4 cpu(s) (4 core(s) x 1 socket(s))
## CPU Load = 1m: 0.21, 5m: 0.14, 15m: 0.10
## Memory = Free: 0.37GB (39%), Used: 0.57GB (61%), Total: 0.95GB
## Swap = Free: 0.09GB (100%), Used: 0.00GB (0%), Total: 0.09GB
## Root = Free: 11.17GB (79%), Used: 2.81GB (21%), Total: 14.61GB
## Updates = 138 apt updates available.
## Sessions = 2 session(s)
## Processes = 116 running processes of 32768 maximum processes
###############################################################################
Welcome to __ _____ ____ _
____ ____ ___ ____ / / / / | / __ )(_)___ _____
/ __ \/ __ \/ _ \/ __ \/ /_/ / /| | / __ / / __ `/ __ \
/ /_/ / /_/ / __/ / / / __ / ___ |/ /_/ / / /_/ / / / /
\____/ .___/\___/_/ /_/_/ /_/_/ |_/_____/_/\__,_/_/ /_/
/_/
openHAB 2.4.0-1 (Release Build)
Looking for a place to get started? Check out 'sudo openhabian-config' and the
documentation at https://www.openhab.org/docs/installati ... abian.html
The openHAB dashboard can be reached at http://oha2:8080
To interact with openHAB on the command line, execute: 'openhab-cli --help'
nachdem ich auf dem Raspberry die Wlan-Verbindung in openhabian-config freigeschaltet
habe ist das gleiche Problem wieder aufgetreten das bereits bei einer vorherigen
Neuinstallation von "openhabian" mit sofortiger installation des "WiFi" vorlag.
Bei einem Neustart wird "eth0" nicht erkannt/angezeigt.
Mit "ipconfig eth0" kann ich die IP-Adresse setzten und der Pi wird
erkannt und kann mit "ssh" aus dem Netz bearbeitet werden.
Einen Eintrag in "/etc/dhcpd.conf" hat keinen Erfolg.
Nach einem Neustart ist nur "wlan0" zu sehen
Vielleicht kann mir jemand helfen und sagen was ich noch einstellen kann!
Mit freundlichen Grüßen
Jürgen
###############################################################################
############### oha2 ########################################################
###############################################################################
## Ip = 192.168.2.13
## Release = Raspbian GNU/Linux buster/sid
## Kernel = Linux 4.14.79-v7+
## Platform = Raspberry Pi 3 Model B Plus Rev 1.3
## Uptime = 0 day(s). 3:8:44
## CPU Usage = 0.5% avg over 4 cpu(s) (4 core(s) x 1 socket(s))
## CPU Load = 1m: 0.21, 5m: 0.14, 15m: 0.10
## Memory = Free: 0.37GB (39%), Used: 0.57GB (61%), Total: 0.95GB
## Swap = Free: 0.09GB (100%), Used: 0.00GB (0%), Total: 0.09GB
## Root = Free: 11.17GB (79%), Used: 2.81GB (21%), Total: 14.61GB
## Updates = 138 apt updates available.
## Sessions = 2 session(s)
## Processes = 116 running processes of 32768 maximum processes
###############################################################################
Welcome to __ _____ ____ _
____ ____ ___ ____ / / / / | / __ )(_)___ _____
/ __ \/ __ \/ _ \/ __ \/ /_/ / /| | / __ / / __ `/ __ \
/ /_/ / /_/ / __/ / / / __ / ___ |/ /_/ / / /_/ / / / /
\____/ .___/\___/_/ /_/_/ /_/_/ |_/_____/_/\__,_/_/ /_/
/_/
openHAB 2.4.0-1 (Release Build)
Looking for a place to get started? Check out 'sudo openhabian-config' and the
documentation at https://www.openhab.org/docs/installati ... abian.html
The openHAB dashboard can be reached at http://oha2:8080
To interact with openHAB on the command line, execute: 'openhab-cli --help'