DS18B20 an ESP01S und Tasmota
-
- Beiträge: 9
- Registriert: 22. Jun 2020 21:15
DS18B20 an ESP01S und Tasmota
Hallo ich verzweifle gerade ein wenig,
ich habe einen einen DS18B20 an einen ESP01S via Tasmota zum Laufen bekommen.
Auf der Tasmota Page bekomme ich die Temperatur richtig angezeigt.
Wie bekomme ich das jetzt hin, dass die Temperatur auch im Panel angezeigt bekomme?
Bin für jeden Tipp dankbar
ich habe einen einen DS18B20 an einen ESP01S via Tasmota zum Laufen bekommen.
Auf der Tasmota Page bekomme ich die Temperatur richtig angezeigt.
Wie bekomme ich das jetzt hin, dass die Temperatur auch im Panel angezeigt bekomme?
Bin für jeden Tipp dankbar
- udo1toni
- Beiträge: 13948
- Registriert: 11. Apr 2018 18:05
- Wohnort: Darmstadt
Re: DS18B20 an ESP01S und Tasmota
Du musst in openHAB das mqtt Addon einrichten (V2 ist die zukunftssichere Variante)
Weiterhin brauchst Du einen MQTT Broker. Mosquitto ist das Programm der Wahl. Du kannst auch den embedded Broker Moquette installieren, allerdings wird der nicht mehr weiterentwickelt. NICHT beide Broker installieren!
Dann musst Du im mqtt Addon eine Bridge zum Broker anlegen (das ist NICHT der System Broker!)
Unterhalb des Brokers musst Du mindestens ein generic mqtt Thing anlegen, und unterhalb dieses generic Thing Channel für alle Eigenschaften, die Du anzeigen willst. Diese Channel musst Du mit Items verlinken, die Du dann ganz normal im HABpanel nutzen kannst.
Weiterhin brauchst Du einen MQTT Broker. Mosquitto ist das Programm der Wahl. Du kannst auch den embedded Broker Moquette installieren, allerdings wird der nicht mehr weiterentwickelt. NICHT beide Broker installieren!
Dann musst Du im mqtt Addon eine Bridge zum Broker anlegen (das ist NICHT der System Broker!)
Unterhalb des Brokers musst Du mindestens ein generic mqtt Thing anlegen, und unterhalb dieses generic Thing Channel für alle Eigenschaften, die Du anzeigen willst. Diese Channel musst Du mit Items verlinken, die Du dann ganz normal im HABpanel nutzen kannst.
openHAB4.1.2 stable in einem Debian-Container (bookworm) (Proxmox 8.1.5, LXC), mit openHABian eingerichtet
- Cyrelian
- Beiträge: 601
- Registriert: 24. Sep 2015 17:55
Re: DS18B20 an ESP01S und Tasmota
Hi,
ich hab den DS18B20 so eingebunden:
THINGS:
ITEMS:
CU
Cyrelian
ich hab den DS18B20 so eingebunden:
THINGS:
Code: Alles auswählen
//=================================================================================================================================================
Thing topic tasmota_XXXXX "Poolsensor" {
Channels:
Type number : TempSensor "Temperatursensor" [stateTopic="tasmota/tasmota_XXXXX/tele/SENSOR", transformationPattern="JSONPATH:$.DS18B20.Temperature"]
Type switch : PowerSwitch "Power Switch" [stateTopic="tasmota/tasmota_XXXXX/stat/POWER", commandTopic="tasmota/tasmota_XXXXX/cmnd/POWER", on="ON", off="OFF"]
Type switch : state "Switch State" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.POWER", on="ON", off="OFF"]
Type string : devicestate "Device State" [stateTopic="tasmota/tasmota_XXXXX/tele/LWT"]
Type string : uptime "Uptime" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Uptime"]
Type string : wifi-rssi "Wifi RSSI" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Wifi.RSSI"]
Type string : wifi-channel "Wifi Channel" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Wifi.Channel"]
Type string : wifi-ssid "Wifi SSID" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Wifi.SSId"]
Type string : wifi-ap "Wifi AP" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Wifi.AP"]
Type string : time "Time" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Time"]
Type string : hostname "hostname" [stateTopic="tasmota/tasmota_XXXXX/stat/STATUS5", transformationPattern="JSONPATH:$.StatusNET.Hostname"]
Type string : ip "IP" [stateTopic="tasmota/tasmota_XXXXX/stat/STATUS5", transformationPattern="JSONPATH:$.StatusNET.IPAddress"]
Type string : version "Version" [stateTopic="tasmota/tasmota_XXXXX/stat/STATUS2", transformationPattern="JSONPATH:$.StatusFWR.Version"]
} // end of thing
Code: Alles auswählen
Group gPoolSensor "Poolsensor" (gTerrasse)
Number PoolSensor_Temp "Wassertemperatur (Pool) [%.1f °C]" <temperature> (gPoolSensor,gChart) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:TempSensor"}
Switch PoolSensor "PoolSensor" <poweroutlet> (gPoolSensor,gInitializeOff) ["Lighting"] {channel="mqtt:topic:mosquitto:tasmota_XXXXX:PowerSwitch"}
String PoolSensor_WifiAp "PoolSensor Wifi AP [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:wifi-ap"}
String PoolSensor_WifiSsid "PoolSensor Wifi SSID [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:wifi-ssid"}
String PoolSensor_WifiChannel "PoolSensor Wifi Channel [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:wifi-channel"}
String PoolSensor_WifiRssi "PoolSensor Wifi RSSI [%s]" <network> (gPoolSensor,gSysRSSI) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:wifi-rssi"}
String PoolSensor_Uptime "PoolSensor Uptime" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:uptime"}
String PoolSensor_Time "PoolSensor Time" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:time"}
String PoolSensor_Hostname "PoolSensor Hostname [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:hostname"}
String PoolSensor_IP "PoolSensor IP [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:ip"}
String PoolSensor_DeviceState "PoolSensor Device State" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:devicestate"}
Switch PoolSensor_Unreach "PoolSensor unreachable" <siren> (gPoolSensor,gSysUnreach) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:state"}
String PoolSensor_FW "PoolSensor Firmware [%s]" <sonoff_th10> (gPoolSensor,gSysSonoff_Maintenance) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:version"}
Cyrelian
-
- Beiträge: 9
- Registriert: 5. Nov 2020 18:14
Re: DS18B20 an ESP01S und Tasmota
Hi,superpedro hat geschrieben: ↑3. Sep 2020 23:07 Hallo ich verzweifle gerade ein wenig,
ich habe einen einen DS18B20 an einen ESP01S via Tasmota zum Laufen bekommen.
Auf der Tasmota Page bekomme ich die Temperatur richtig angezeigt.
Wie bekomme ich das jetzt hin, dass die Temperatur auch im Panel angezeigt bekomme?
Bin für jeden Tipp dankbar
Hast du bereits MQTT in openHAB eingerichtet?
Wenn das der Fall ist, kannst du ganz einfach ein Thing anlegen, mit dem du dann den passenden Channel verknüpfst, in dem du dann dein Topic angibst, auf dem der Wert geliefert wird. Hier musst du aber dann noch den richtigen Wert aus dem JSON herausfiltern.
Ist das der Ansatz, den du benötigst oder soll ich es noch weiter erläutern?
Ich hoffe, dass ich dir damit bei deinem Problem weiterhelfen konnte.
Viele Grüße
Jan
Wenn du noch weiter Anleitungen zum Thema openHAB und Smart Home suchst, findest du diese auch unter https://bloggingwelt.de/smart-home/ .
Viele Grüße
Jan
Wenn du noch weiter Anleitungen zum Thema openHAB und Smart Home suchst, findest du diese auch unter https://bloggingwelt.de/smart-home/ .
- udo1toni
- Beiträge: 13948
- Registriert: 11. Apr 2018 18:05
- Wohnort: Darmstadt
Re: DS18B20 an ESP01S und Tasmota
Du hast aber schon gesehen, dass der Beitrag vom September ist?
openHAB4.1.2 stable in einem Debian-Container (bookworm) (Proxmox 8.1.5, LXC), mit openHABian eingerichtet
-
- Beiträge: 9
- Registriert: 5. Nov 2020 18:14
Re: DS18B20 an ESP01S und Tasmota
Ja, das habe ich gesehen, da er aber nicht mehr geantwortet hatte, wusste ich nicht genau, ob das Problem schon gelöst ist
Ich hoffe, dass ich dir damit bei deinem Problem weiterhelfen konnte.
Viele Grüße
Jan
Wenn du noch weiter Anleitungen zum Thema openHAB und Smart Home suchst, findest du diese auch unter https://bloggingwelt.de/smart-home/ .
Viele Grüße
Jan
Wenn du noch weiter Anleitungen zum Thema openHAB und Smart Home suchst, findest du diese auch unter https://bloggingwelt.de/smart-home/ .
-
- Beiträge: 9
- Registriert: 22. Jun 2020 21:15
Re: DS18B20 an ESP01S und Tasmota
Hallo,Cyrelian hat geschrieben: ↑6. Sep 2020 12:42 Hi,
ich hab den DS18B20 so eingebunden:
THINGS:ITEMS:Code: Alles auswählen
//================================================================================================================================================= Thing topic tasmota_XXXXX "Poolsensor" { Channels: Type number : TempSensor "Temperatursensor" [stateTopic="tasmota/tasmota_XXXXX/tele/SENSOR", transformationPattern="JSONPATH:$.DS18B20.Temperature"] Type switch : PowerSwitch "Power Switch" [stateTopic="tasmota/tasmota_XXXXX/stat/POWER", commandTopic="tasmota/tasmota_XXXXX/cmnd/POWER", on="ON", off="OFF"] Type switch : state "Switch State" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.POWER", on="ON", off="OFF"] Type string : devicestate "Device State" [stateTopic="tasmota/tasmota_XXXXX/tele/LWT"] Type string : uptime "Uptime" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Uptime"] Type string : wifi-rssi "Wifi RSSI" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Wifi.RSSI"] Type string : wifi-channel "Wifi Channel" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Wifi.Channel"] Type string : wifi-ssid "Wifi SSID" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Wifi.SSId"] Type string : wifi-ap "Wifi AP" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Wifi.AP"] Type string : time "Time" [stateTopic="tasmota/tasmota_XXXXX/tele/STATE", transformationPattern="JSONPATH:$.Time"] Type string : hostname "hostname" [stateTopic="tasmota/tasmota_XXXXX/stat/STATUS5", transformationPattern="JSONPATH:$.StatusNET.Hostname"] Type string : ip "IP" [stateTopic="tasmota/tasmota_XXXXX/stat/STATUS5", transformationPattern="JSONPATH:$.StatusNET.IPAddress"] Type string : version "Version" [stateTopic="tasmota/tasmota_XXXXX/stat/STATUS2", transformationPattern="JSONPATH:$.StatusFWR.Version"] } // end of thing
CUCode: Alles auswählen
Group gPoolSensor "Poolsensor" (gTerrasse) Number PoolSensor_Temp "Wassertemperatur (Pool) [%.1f °C]" <temperature> (gPoolSensor,gChart) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:TempSensor"} Switch PoolSensor "PoolSensor" <poweroutlet> (gPoolSensor,gInitializeOff) ["Lighting"] {channel="mqtt:topic:mosquitto:tasmota_XXXXX:PowerSwitch"} String PoolSensor_WifiAp "PoolSensor Wifi AP [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:wifi-ap"} String PoolSensor_WifiSsid "PoolSensor Wifi SSID [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:wifi-ssid"} String PoolSensor_WifiChannel "PoolSensor Wifi Channel [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:wifi-channel"} String PoolSensor_WifiRssi "PoolSensor Wifi RSSI [%s]" <network> (gPoolSensor,gSysRSSI) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:wifi-rssi"} String PoolSensor_Uptime "PoolSensor Uptime" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:uptime"} String PoolSensor_Time "PoolSensor Time" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:time"} String PoolSensor_Hostname "PoolSensor Hostname [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:hostname"} String PoolSensor_IP "PoolSensor IP [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:ip"} String PoolSensor_DeviceState "PoolSensor Device State" (gPoolSensor) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:devicestate"} Switch PoolSensor_Unreach "PoolSensor unreachable" <siren> (gPoolSensor,gSysUnreach) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:state"} String PoolSensor_FW "PoolSensor Firmware [%s]" <sonoff_th10> (gPoolSensor,gSysSonoff_Maintenance) {channel="mqtt:topic:mosquitto:tasmota_XXXXX:version"}
Cyrelian
vielen Dank für deine Antwort und sorry habe es jetzt erst gesehen.
Irgendwie stehe ich auf dem Schlauch.
Hier habe ich mal die Infobox von meinem Tasmota Sensor angehängt.
Wäre super wenn Du mir die Codezeilen an diesen adaptieren könntest, denn irgendwie fehlen mir hier grundlegende Dinge. Ich hoffe, wenn ich den Code sehe erschließt sich das für mich.
MIt Tasmota mit 4 Relais habe ich das irgendwie hinbekommen.
Vielen Dank
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
- Cyrelian
- Beiträge: 601
- Registriert: 24. Sep 2015 17:55
Re: DS18B20 an ESP01S und Tasmota
Hi,
so sollte es passen. Ist aber nicht getestet.
CU
Cyrelian
so sollte es passen. Ist aber nicht getestet.
Code: Alles auswählen
//=================================================================================================================================================
Thing topic swPorchLight "PorchLight" {
Channels:
Type number : TempSensor "Temperatursensor" [stateTopic="cmnd/swPorchLight/tele/SENSOR", transformationPattern="JSONPATH:$.DS18B20.Temperature"]
Type switch : PowerSwitch "Power Switch" [stateTopic="cmnd/swPorchLight/stat/POWER", commandTopic="cmnd/swPorchLight/cmnd/POWER", on="ON", off="OFF"]
Type switch : state "Switch State" [stateTopic="cmnd/swPorchLight/tele/STATE", transformationPattern="JSONPATH:$.POWER", on="ON", off="OFF"]
Type string : devicestate "Device State" [stateTopic="cmnd/swPorchLight/tele/LWT"]
Type string : uptime "Uptime" [stateTopic="cmnd/swPorchLight/tele/STATE", transformationPattern="JSONPATH:$.Uptime"]
Type string : wifi-rssi "Wifi RSSI" [stateTopic="cmnd/swPorchLight/tele/STATE", transformationPattern="JSONPATH:$.Wifi.RSSI"]
Type string : wifi-channel "Wifi Channel" [stateTopic="cmnd/swPorchLight/tele/STATE", transformationPattern="JSONPATH:$.Wifi.Channel"]
Type string : wifi-ssid "Wifi SSID" [stateTopic="cmnd/swPorchLight/tele/STATE", transformationPattern="JSONPATH:$.Wifi.SSId"]
Type string : wifi-ap "Wifi AP" [stateTopic="cmnd/swPorchLight/tele/STATE", transformationPattern="JSONPATH:$.Wifi.AP"]
Type string : time "Time" [stateTopic="cmnd/swPorchLight/tele/STATE", transformationPattern="JSONPATH:$.Time"]
Type string : hostname "hostname" [stateTopic="cmnd/swPorchLight/stat/STATUS5", transformationPattern="JSONPATH:$.StatusNET.Hostname"]
Type string : ip "IP" [stateTopic="cmnd/swPorchLight/stat/STATUS5", transformationPattern="JSONPATH:$.StatusNET.IPAddress"]
Type string : version "Version" [stateTopic="cmnd/swPorchLight/stat/STATUS2", transformationPattern="JSONPATH:$.StatusFWR.Version"]
} // end of thing
Code: Alles auswählen
Group gPoolSensor "Poolsensor" (gTerrasse)
Number PoolSensor_Temp "Wassertemperatur (Pool) [%.1f °C]" <temperature> (gPoolSensor,gChart) {channel="mqtt:topic:mosquitto:swPorchLight:TempSensor"}
Switch PoolSensor "PoolSensor" <poweroutlet> (gPoolSensor,gInitializeOff) ["Lighting"] {channel="mqtt:topic:mosquitto:swPorchLight:PowerSwitch"}
String PoolSensor_WifiAp "PoolSensor Wifi AP [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:swPorchLight:wifi-ap"}
String PoolSensor_WifiSsid "PoolSensor Wifi SSID [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:swPorchLight:wifi-ssid"}
String PoolSensor_WifiChannel "PoolSensor Wifi Channel [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:swPorchLight:wifi-channel"}
String PoolSensor_WifiRssi "PoolSensor Wifi RSSI [%s]" <network> (gPoolSensor,gSysRSSI) {channel="mqtt:topic:mosquitto:swPorchLight:wifi-rssi"}
String PoolSensor_Uptime "PoolSensor Uptime" (gPoolSensor) {channel="mqtt:topic:mosquitto:swPorchLight:uptime"}
String PoolSensor_Time "PoolSensor Time" (gPoolSensor) {channel="mqtt:topic:mosquitto:swPorchLight:time"}
String PoolSensor_Hostname "PoolSensor Hostname [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:swPorchLight:hostname"}
String PoolSensor_IP "PoolSensor IP [%s]" (gPoolSensor) {channel="mqtt:topic:mosquitto:swPorchLight:ip"}
String PoolSensor_DeviceState "PoolSensor Device State" (gPoolSensor) {channel="mqtt:topic:mosquitto:swPorchLight:devicestate"}
Switch PoolSensor_Unreach "PoolSensor unreachable" <siren> (gPoolSensor,gSysUnreach) {channel="mqtt:topic:mosquitto:swPorchLight:state"}
String PoolSensor_FW "PoolSensor Firmware [%s]" <sonoff_th10> (gPoolSensor,gSysSonoff_Maintenance) {channel="mqtt:topic:mosquitto:swPorchLight:version"}
Cyrelian