openhabforum.de


https://openhabforum.de/

KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

https://openhabforum.de/viewtopic.php?t=6760

Seite 1 von 1

KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

Verfasst: 17. Mär 2022 14:56
von BoobFrog
Guten Tag zusammen,
ich habe mit openHAB 3.2 und jetzt mit openHAB 3.3M2 folgende Probleme..

Bisher kam ich mit openHAB eigentlich immer gut klar, aber aktuell ärgert es mich etwas.
Ich habe eine KNX Installation die ich gern mit openHAB erweitern möchte.

Die Rollladen fahren über die rollershutter Funktion und regulären UP und DOWN befehlen ganz normal wie es soll. Der Stopp befehl kommt leider nicht durch und wenn ich über einen Dimmer die Rollladen z.B. auf 60% fahren möchte, bleibt der Rollladen nach 10% stehen.

Zugehörige Einträge aus dem Log:

Code: Alles auswählen

2022-03-17 14:41:07.523 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'EzTTRollladen' received command 0
2022-03-17 14:41:07.527 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'EzTTRollladen' predicted to become 0
2022-03-17 14:41:07.536 [INFO ] [openhab.event.ItemStateChangedEvent ] - Item 'EzTTRollladen' changed from 25 to 0
2022-03-17 14:41:09.626 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'EzTTRollladen' received command 18
2022-03-17 14:41:09.627 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'EzTTRollladen' predicted to become 18
2022-03-17 14:41:09.629 [INFO ] [openhab.event.ItemStateChangedEvent ] - Item 'EzTTRollladen' changed from 0 to 18
2022-03-17 14:41:09.715 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'EzTTRollladen' received command 18
2022-03-17 14:41:09.716 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'EzTTRollladen' predicted to become 18
Bekomme zwar ein Stopp ins Log aber es geht nicht weiter auf den Bus:

Code: Alles auswählen

2022-03-17 14:55:06.399 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'WzRollladen' received command STOP
2022-03-17 14:55:06.558 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'WzRollladen' received command STOP
2022-03-17 14:55:06.717 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'WzRollladen' received command STOP
2022-03-17 14:55:06.878 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'WzRollladen' received command STOP
.Things Konfiguration:

Code: Alles auswählen

 
Thing device Rollladen0 "KNX Rollladenaktor 0" @ "Rollladen 1/2"
    [
        address="1.1.12",
        fetch=true,
        pingInterval=300,
        readInterval=3600
    ] 
    {
            Type rollershutter-control  : WohnzRollladen        "Wohnzimmer Rollladen"                  [upDown="6/1/0", stopMove="6/2/0", position="6/3/0+<6/4/0"]
            Type rollershutter-control  : EsszTerrRollladen     "Esszimmer Terrassentür Rollladen"      [upDown="6/1/1", stopMove="6/2/1", position="6/3/1+<6/4/1"]
            Type rollershutter-control  : EsszRollladen         "Esszimmer Rollladen"                   [upDown="6/1/2", stopMove="6/2/2", position="6/3/2+<6/4/2"]
            Type rollershutter-control  : KuecheRollladen       "Küche Rollladen"                       [upDown="6/1/3", stopMove="6/2/3", position="6/3/3+<6/4/3"]
            Type rollershutter-control  : KzEGRollladen         "KinderzimmerRollladen EG"              [upDown="6/1/4", stopMove="6/2/4", position="6/3/4+<6/4/4"]
            Type rollershutter-control  : WCRollladen           "WC Rollladen"                          [upDown="6/1/5", stopMove="6/2/5", position="6/3/5+<6/4/5"] 
            Type rollershutter-control  : TreppenhRollladen     "Treppenhaus Rollladen"                 [upDown="6/1/6", stopMove="6/2/6", position="6/3/6+<6/4/6"]       
            Type rollershutter-control  : KzOGRollladen         "KinderzimmerRollladen OG"              [upDown="6/1/7", stopMove="6/2/7", position="6/3/7+<6/4/7"]
    }
.Items Konfiguration:

Code: Alles auswählen

Rollershutter   WzRollladen             "Wz Rollladen [%d %%]"             <rollershutter>  (gRollladenEG)     {channel="knx:device:bridge:Rollladen0:WohnzRollladen"}
Rollershutter   EzRollladen             "Ez Rollladen [%d %%]"             <rollershutter>  (gRollladenEG)     {channel="knx:device:bridge:Rollladen0:EsszRollladen"}
Rollershutter   EzTTRollladen           "EzTür Rollladen [%d %%]"          <rollershutter>  (gRollladenEG)     {channel="knx:device:bridge:Rollladen0:EsszTerrRollladen"}
Rollershutter   KuecheRollladen         "Küche Rollladen [%d %%]"          <rollershutter>  (gRollladenEG)     {channel="knx:device:bridge:Rollladen0:KuecheRollladen"}
Rollershutter   KzEGRollladen           "Rollladen [%d %%]"                <rollershutter>   /*(gRollladenEG)*/      {channel="knx:device:bridge:Rollladen0:KzEGRollladen"}
Rollershutter   WCRollladen             "WC Rollladen [%d %%]"             <rollershutter>  (gRollladenEG)     {channel="knx:device:bridge:Rollladen0:WCRollladen"}
Rollershutter   ThRollladen             "Treppenhaus Rollladen [%d %%]"    <rollershutter>  (gRollladenOG)     {channel="knx:device:bridge:Rollladen0:TreppenhRollladen"}
Rollershutter   KzOGRollladen           "KzOG Rollladen [%d %%]"           <rollershutter>  (gRollladenOG)     {channel="knx:device:bridge:Rollladen0:KzOGRollladen"}
Ein Auszug aus der ETS Konfiguration ist im Anhang als Bild.


Dazu kommt das ich machmal das Log endlos gespamt bekomme von Rollladen Status der sich aber nicht ändert.

Code: Alles auswählen

...
2022-03-17 14:39:12.402 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:12.484 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:12.484 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:12.557 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:12.557 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:12.639 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:12.639 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:12.722 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:12.722 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:12.804 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:12.804 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:12.886 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:12.886 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:12.959 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:12.959 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.041 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.041 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.123 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.123 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.205 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.205 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.287 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.287 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.359 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.360 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.441 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.442 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.523 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.523 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.605 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.606 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.688 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.688 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.761 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.761 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.843 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.844 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:13.925 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:13.925 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.007 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.008 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.089 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.089 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.162 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.162 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.244 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.244 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.326 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.326 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.408 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.408 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.490 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.491 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.563 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.564 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.645 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.645 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.727 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.727 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.809 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.809 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.891 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.891 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:14.964 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:14.964 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:15.046 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:15.047 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:15.128 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:15.128 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:15.211 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:15.211 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:15.292 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:15.293 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:15.374 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:15.374 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:15.447 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:15.447 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:15.529 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:15.529 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:15.611 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0
2022-03-17 14:39:15.611 [INFO ] [penhab.event.ItemStatePredictedEvent] - Item 'KzOGRollladen' predicted to become 0
2022-03-17 14:39:15.693 [INFO ] [openhab.event.ItemCommandEvent      ] - Item 'KzOGRollladen' received command 0

----


Vielen Dank schon mal!

Re: KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

Verfasst: 17. Mär 2022 17:38
von udo1toni
Wenn es sich um einen knx Aktor handelt, darfst Du kein rollershutter-control verwenden, das ist nur interesaant, wenn Du einen knx Taster verwenden willst, um einen Nicht-knx-Aktor zu steuern.

Re: KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

Verfasst: 17. Mär 2022 19:03
von BoobFrog
Vielen Dank für deine Antwort

ich hab es nun wie folgt geändert, ohne -control, leider ohne Änderung. Das Problem besteht weiterhin.

Code: Alles auswählen

Thing device Rollladen0 "KNX Rollladenaktor 0" @ "Rollladen 1/2"
    [
        address="1.1.12",
        fetch=true,
        pingInterval=300,
        readInterval=3600
    ] 
    {
            Type rollershutter  : WohnzRollladen        "Wohnzimmer Rollladen"                  [upDown="6/1/0", stopMove="6/2/0", position="6/3/0+<6/4/0"]
            Type rollershutter  : EsszTerrRollladen     "Esszimmer Terrassentür Rollladen"      [upDown="6/1/1", stopMove="6/2/1", position="6/3/1+<6/4/1"]
            Type rollershutter  : EsszRollladen         "Esszimmer Rollladen"                   [upDown="6/1/2", stopMove="6/2/2", position="6/3/2+<6/4/2"]
            Type rollershutter  : KuecheRollladen       "Küche Rollladen"                       [upDown="6/1/3", stopMove="6/2/3", position="6/3/3+<6/4/3"]
            Type rollershutter  : KzEGRollladen         "KinderzimmerRollladen EG"              [upDown="6/1/4", stopMove="6/2/4", position="6/3/4+<6/4/4"]
            Type rollershutter  : WCRollladen           "WC Rollladen"                          [upDown="6/1/5", stopMove="6/2/5", position="6/3/5+<6/4/5"] 
            Type rollershutter  : TreppenhRollladen     "Treppenhaus Rollladen"                 [upDown="6/1/6", stopMove="6/2/6", position="6/3/6+<6/4/6"]       
            Type rollershutter  : KzOGRollladen         "KinderzimmerRollladen OG"              [upDown="6/1/7", stopMove="6/2/7", position="6/3/7+<6/4/7"]
    }

Re: KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

Verfasst: 17. Mär 2022 19:10
von BoobFrog
Okay, vielen dank!

nach einem Neustart von openHAB geht es nun! Danke sehr!

Re: KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

Verfasst: 17. Mär 2022 22:42
von udo1toni
Super!

Wenn man über *.things Dateien Things definiert, muss man (insbesondere bei Änderungen) immer mal wieder ein Neu Einlesen der Daten provozieren, am einfachsten tatsächlich über einen Neustart von openHAB, man kann aber auch die betroffenne Bindings stoppen und anschließend wieder starten, das sollte ebenfalls zu einem zuverlässigen Reload führen. Ich bin mir nicht sicher, ob man den Stopp korrekt über die UI hinbekommen kann, oder ob es dazu die Karaf Konsole braucht.

Re: KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

Verfasst: 11. Sep 2023 11:49
von BoobFrog
Guten Tag zusammen ich hole den Beitrag noch einmal hoch. Ich bin gerade dabei nach und nach ein paar Rules zu schreiben zur Beschattung. Da ist mir aufgefallen das wenn ich mache Rollladen z.B. nicht über KzEGRollladen.sendCommand(77) oder über den Slider in der Sitemap fahren kann.

Über *.sendCommand(UP / Down) funktioniert es perfekt.

Aktuell bin ich noch mit openHAB 3.4.4, wenn ich mal etwas Zeit habe will ich auf oH4 updaten, denke aber nicht das es damit zusammenhängt.

Re: KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

Verfasst: 11. Sep 2023 15:06
von nw378
Die Gruppenadressen für die Position sind in der ETS korrekt zugewiesen?

Versuch mal in der .items Datei autoupdate="false" zu ergänzen, also:

Code: Alles auswählen

Rollershutter   WzRollladen             "Wz Rollladen [%d %%]"             <rollershutter>  (gRollladenEG)     {channel="knx:device:bridge:Rollladen0:WohnzRollladen", autoupdate="false"}
Bzgl. OH 3.4 oder 4.x sollte es hier keine Unterschiede geben.

Randnotiz: Kz ist eine sehr ungünstige Abkürzung für Kinderzimmer...

Re: KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

Verfasst: 12. Sep 2023 12:23
von BoobFrog
Ich habe gerade noch mal die Gruppenadresse verglichen, das scheint soweit alles zu passen. Habe aber auch einen Screenshot angehängt, manchmal sieht man den Wald vor lauter Bäumen nicht.
Das Autoupdate = false hab ich gestern Vormittag schon dran gehängt als ich nach dem Problem etwas gegooglet habe.

Zur Randnotiz hab ich mir in dem Moment keinen Kopf drum gemacht. Bei Zeiten mal ändern. :-/

Hat sonst noch jemand eine idee dazu?

Re: KNX Rollladen in OH3.3M2 Stopp & "Dimmen" funktioniert nicht

Verfasst: 12. Sep 2023 15:54
von udo1toni
Mein Tipp: ergänze bitte mal den DPT 5.001 vor den Positions-GA:

Code: Alles auswählen

Thing device Rollladen0 "KNX Rollladenaktor 0" @ "Rollladen 1/2" [
    address="1.1.12",
    fetch=true,
    pingInterval=300,
    readInterval=3600
 ] {
        Type rollershutter : WohnzRollladen    "Wohnzimmer Rollladen"             [upDown="6/1/0", stopMove="6/2/0", position="5.001:6/3/0+<6/4/0"]
        Type rollershutter : EsszTerrRollladen "Esszimmer Terrassentür Rollladen" [upDown="6/1/1", stopMove="6/2/1", position="5.001:6/3/1+<6/4/1"]
        Type rollershutter : EsszRollladen     "Esszimmer Rollladen"              [upDown="6/1/2", stopMove="6/2/2", position="5.001:6/3/2+<6/4/2"]
        Type rollershutter : KuecheRollladen   "Küche Rollladen"                  [upDown="6/1/3", stopMove="6/2/3", position="5.001:6/3/3+<6/4/3"]
        Type rollershutter : KzEGRollladen     "KinderzimmerRollladen EG"         [upDown="6/1/4", stopMove="6/2/4", position="5.001:6/3/4+<6/4/4"]
        Type rollershutter : WCRollladen       "WC Rollladen"                     [upDown="6/1/5", stopMove="6/2/5", position="5.001:6/3/5+<6/4/5"] 
        Type rollershutter : TreppenhRollladen "Treppenhaus Rollladen"            [upDown="6/1/6", stopMove="6/2/6", position="5.001:6/3/6+<6/4/6"]       
        Type rollershutter : KzOGRollladen     "KinderzimmerRollladen OG"         [upDown="6/1/7", stopMove="6/2/7", position="5.001:6/3/7+<6/4/7"]
    }
Bei Definition über *.things Dateien bitte immer einen Neustart von openHAB in Betracht ziehen :)
Alle Zeiten sind UTC+02:00
Seite 1 von 1

Powered by phpBB® Forum Software © phpBB Limited

Deutsche Übersetzung durch phpBB.de