Bis auf! -_- die Samba Freigabe, hab openHABian installiert und danach als erstes Samba installiert, die Freigabe lief ohne Probleme. Nach dem restore und testlauf hab ich die VM abgeschaltet und dem Pi über den DHCP eine neue IP geben lassen, reboot und die Samba Freigabe ist über Windows nicht mehr erreichbar, auf Android läuft die Freigabe wie gehabt einwandfrei.
Ich hatte das schon mal, weiß leider nicht mehr was es war...
Hat jemand da eine idee zu ?
Samba.conf:
Code: Alles auswählen
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
; panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
; usershare allow guests = yes
#======================= Share Definitions =======================
;[homes]
; comment = Home Directories
; browseable = no
; valid users = %S
; writeable = yes
; create mask = 0700
; directory mask = 0700
;[printers]
; comment = All Printers
; browseable = no
; public = no
; path = /var/spool/samba
; printable = yes
; guest ok = no
; read only = yes
; create mask = 0700
# Windows clients look for this share name as a source of downloadable
# printer drivers
;[print$]
; comment = Printer Drivers
; path = /var/lib/samba/printers
; browseable = no
; public = no
; read only = yes
; guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin
#=================== Custom Share Definitions ====================
;[openHAB-share]
; comment=openHAB combined folders
; path=/srv
; writeable=yes
; public=no
; create mask=0664
; directory mask=0775
; veto files = /Thumbs.db/.DS_Store/._.DS_Store/.apdisk/._*/
; delete veto files = yes
[openHAB-addons]
comment=openHAB addons
path=/usr/share/openhab/addons
writeable=yes
public=no
create mask=0777
directory mask=0775
veto files = /Thumbs.db/.DS_Store/._.DS_Store/.apdisk/._*/
delete veto files = yes
[openHAB-conf]
comment=openHAB site configuration
path=/etc/openhab
writeable=yes
public=no
create mask=0777
directory mask=0775
veto files = /Thumbs.db/.DS_Store/._.DS_Store/.apdisk/._*/
delete veto files = yes
[openHAB-userdata]
comment=openHAB userdata
path=/var/lib/openhab
writeable=yes
public=no
create mask=0777
directory mask=0775
veto files = /Thumbs.db/.DS_Store/._.DS_Store/.apdisk/._*/
delete veto files = yes
[openHAB-sys]
comment=openHAB application
path=/usr/share/openhab
writeable=yes
public=no
create mask=0777
directory mask=0775
veto files = /Thumbs.db/.DS_Store/._.DS_Store/.apdisk/._*/
delete veto files = yes
; ATTENTION: /var/log is on zram
; Sharing this will cause data loss of logs
; You *can* uncomment this but you have been warned
;[openHAB-logs]
; comment=openHAB log files
; path=/var/log/openhab
; writeable=yes
; public=no
; create mask=0664
; directory mask=0775
; veto files = /Thumbs.db/.DS_Store/._.DS_Store/.apdisk/._*/
; delete veto files = yes
# vim: filetype=samba
Code: Alles auswählen
● smbd.service - Samba SMB Daemon
Loaded: loaded (/lib/systemd/system/smbd.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2022-05-20 16:43:45 CEST; 2h 22min ago
Docs: man:smbd(8)
man:samba(7)
man:smb.conf(5)
Process: 857 ExecStartPre=/usr/share/samba/update-apparmor-samba-profile (code=exited, status=0/SUCCESS)
Main PID: 859 (smbd)
Status: "smbd: ready to serve connections..."
Tasks: 5 (limit: 9353)
CPU: 1.149s
CGroup: /system.slice/smbd.service
├─ 859 /usr/sbin/smbd --foreground --no-process-group
├─ 884 /usr/sbin/smbd --foreground --no-process-group
├─ 885 /usr/sbin/smbd --foreground --no-process-group
├─ 893 /usr/sbin/smbd --foreground --no-process-group
└─6586 /usr/sbin/smbd --foreground --no-process-group
May 20 16:43:44 openhabian systemd[1]: Starting Samba SMB Daemon...
May 20 16:43:45 openhabian systemd[1]: Started Samba SMB Daemon.
May 20 18:26:17 openhabian smbd[6586]: pam_unix(samba:session): session opened for user openhabian(uid=1000) by (uid=0)
Vielen Dank schon mal!
Zu ZFS und TrueNAS, gucke jetzt erstmal das OH läuft und dann schaue ich mal wohin die Reise geht.
Das Gute ist TureNAS scale ist auch auf Debian Basis. Da müsste doch auch noch mehr als nur Docker mit laufen?!
