Ja, Proxmox ist in meinen Augen eine der besten Virtualisierungsplattformen am Markt. Insbesondere kommt sie ohne viel Schnickschnack daher, bietet aber massig Funktionen, die bei der Konkurrenz teilweise nur gegen absurd hohe Lizenzzahlungen zu bekommen sind.
Und wenn man keinen Support benötigt, muss man überhaupt nichts zahlen und hat keine weiteren Nachteile, mal abgesehen von der Nervmeldung beim Einloggen (die man aber loswerden kann).
Ich arbeite beruflich als Anwender mit VMWare, ja, die Oberfläche ist schön bunt, aber schon der Zugriff als eingeschränkter User ist fürchterlich, weil ich zunächst nach dem Login den richtigen Bereich auswählen muss, da ich sonst nur Meckermeldungen bekomme...
Enocean und das Große Fragezeichen ???
Moderator: seppy
-
udo1toni
- Beiträge: 15241
- Registriert: 11. Apr 2018 18:05
- Wohnort: Darmstadt
Re: Enocean und das Große Fragezeichen ???
openHAB4.3.3 stable in einem Debian-Container (bookworm) (Proxmox 8.3.5, LXC), mit openHABian eingerichtet
-
Fabse1988
- Beiträge: 22
- Registriert: 10. Feb 2023 21:40
Re: Enocean und das Große Fragezeichen ???
dann muss ich mich dafür entschuldigen das es hier erst dann weiter geht, wenn der Proxmox server am Laufen ist. Wie läuft es denn dann mit Usb Gateway,s ? werden die dann auch ganz normal erkannt in den erstellt VMs ? könnte man sich ein USB Header adapter für mein Enocean Adapter besorgen und ihn einbinden ? vielleicht bietet das Mainboard ja auch die Pins.
muss ich mir dann einfach mal genau anschauen wenn wir einen hier Haben.
Möchte halt eine All in One Lösung mit Kamera Nas EMail usw, dafür ist ein Raspberry einfach zu schwach.
muss ich mir dann einfach mal genau anschauen wenn wir einen hier Haben.
Möchte halt eine All in One Lösung mit Kamera Nas EMail usw, dafür ist ein Raspberry einfach zu schwach.
-
udo1toni
- Beiträge: 15241
- Registriert: 11. Apr 2018 18:05
- Wohnort: Darmstadt
Re: Enocean und das Große Fragezeichen ???
Eine alte SSD hast Du nicht zur Hand? Weil, das sind eh alles Standard Bauteile, ich gehe mal davon aus, dass vom Alter her eine SATA Platte verbaut ist, das sollte also keine große Sache sein, da eine andere Platte einzubauen. openHAB auf debian benötigt keine große Platte, selbst eine 10 GByte SSD wäre ausreichend (ich denke nicht, dass man so kleine SSDs noch bekommt). Eine drehende Platte wäre hingegen eher nicht so gut, einfach weil sie mechanisch beansprucht wird und viel zu viel Strom schluckt.
openHAB4.3.3 stable in einem Debian-Container (bookworm) (Proxmox 8.3.5, LXC), mit openHABian eingerichtet
-
Fabse1988
- Beiträge: 22
- Registriert: 10. Feb 2023 21:40
Re: Enocean und das Große Fragezeichen ???
Werde es heute Abend einfach noch mal neu aufspielen auf eine andere ssd. Melde mich dann wieder wenn ich die Oberfläche von openhab sehen kann. 
-
Fabse1988
- Beiträge: 22
- Registriert: 10. Feb 2023 21:40
Re: Enocean und das Große Fragezeichen ???
udo1toni hat geschrieben: ↑19. Feb 2023 14:50 Eine alte SSD hast Du nicht zur Hand? Weil, das sind eh alles Standard Bauteile, ich gehe mal davon aus, dass vom Alter her eine SATA Platte verbaut ist, das sollte also keine große Sache sein, da eine andere Platte einzubauen. openHAB auf debian benötigt keine große Platte, selbst eine 10 GByte SSD wäre ausreichend (ich denke nicht, dass man so kleine SSDs noch bekommt). Eine drehende Platte wäre hingegen eher nicht so gut, einfach weil sie mechanisch beansprucht wird und viel zu viel Strom schluckt.
so habe jetzt alles noch einmal von neuem mit einer neuen SSd Gestartet funktioniert auch bisher alles.
habe sogar mal nach dem USB enocean Adapter suchen lassen hier das ergebniss, vielleicht kannst du damit ja was anfangen.
Code: Alles auswählen
code: lsusb
Bus 002 Device 005: ID 0403:6010 Future Technology Devices International, Ltd FT2232C/D/H Dual UART/FIFO IC
Bus 002 Device 004: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 046a:b090 Cherry GmbH Keyboard
Bus 004 Device 002: ID 046d:c051 Logitech, Inc. G3 (MX518) Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
code: lsusb -t
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 8: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 2: Dev 5, If 0, Class=Vendor Specific Class, Driver=ftdi_sio, 12M
|__ Port 2: Dev 5, If 1, Class=Vendor Specific Class, Driver=ftdi_sio, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
Zuletzt geändert von Fabse1988 am 25. Feb 2023 22:09, insgesamt 1-mal geändert.
-
Fabse1988
- Beiträge: 22
- Registriert: 10. Feb 2023 21:40
Re: Enocean und das Große Fragezeichen ???
Code: Alles auswählen
und hier noch der befehl : sudo dmesg
[ 0.000000] Linux version 5.10.0-21-686-pae (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35 .2) #1 SMP Debian 5.10.162-1 (2023-01-21)
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ee94fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ee95000-0x000000007eebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007eebf000-0x000000007eef4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007eef5000-0x000000007efbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007efbf000-0x000000007efeefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007efef000-0x000000007effefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007efff000-0x000000007effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BSC-Computer GmbH BC/DN2800MT, BIOS MTCDT10N.86A.0166.2013.0 427.1030 04/27/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1866.684 MHz processor
[ 0.002424] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002435] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002458] last_pfn = 0x7f000 max_arch_pfn = 0x1000000
[ 0.002470] MTRR default type: uncachable
[ 0.002473] MTRR fixed ranges enabled:
[ 0.002478] 00000-9FFFF write-back
[ 0.002482] A0000-BFFFF uncachable
[ 0.002486] C0000-DFFFF write-protect
[ 0.002489] E0000-FFFFF uncachable
[ 0.002493] MTRR variable ranges enabled:
[ 0.002498] 0 base 000000000 mask F80000000 write-back
[ 0.002502] 1 base 07F000000 mask FFF000000 uncachable
[ 0.002506] 2 base 0FFE00000 mask FFFE00000 write-protect
[ 0.002509] 3 disabled
[ 0.002512] 4 disabled
[ 0.002515] 5 disabled
[ 0.002518] 6 disabled
[ 0.002639] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.011203] found SMP MP-table at [mem 0x000fbe40-0x000fbe4f]
[ 0.012801] initial memory mapped: [mem 0x00000000-0x121fffff]
[ 0.012931] RAMDISK: [mem 0x3530b000-0x3697cfff]
[ 0.012942] ACPI: Early table checksum verification disabled
[ 0.012957] ACPI: RSDP 0x00000000000F2390 000024 (v02 INTEL )
[ 0.012969] ACPI: XSDT 0x000000007EFFE120 000064 (v01 INTEL DN2800MT 000000A 6 01000013)
[ 0.012986] ACPI: FACP 0x000000007EFF6000 0000F4 (v03 INTEL DN2800MT 000000A 6 MSFT 0100000D)
[ 0.013002] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEvent Block: 32/16 (20200925/tbfadt-564)
[ 0.013014] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBl ock: 32/24 (20200925/tbfadt-564)
[ 0.013023] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20200925/tbfadt-669)
[ 0.013032] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24 , using default 32 (20200925/tbfadt-669)
[ 0.013044] ACPI: DSDT 0x000000007EFF8000 005CBA (v02 INTEL DN2800MT 000000A 6 MSFT 0100000D)
[ 0.013057] ACPI: FACS 0x000000007EF85000 000040
[ 0.013067] ACPI: FACS 0x000000007EF85000 000040
[ 0.013078] ACPI: SSDT 0x000000007EFF7000 00043E (v01 INTEL DN2800MT 000000A 6 MSFT 0100000D)
[ 0.013091] ACPI: APIC 0x000000007EFF5000 000084 (v02 INTEL DN2800MT 000000A 6 MSFT 0100000D)
[ 0.013104] ACPI: MCFG 0x000000007EFF4000 00003C (v01 INTEL DN2800MT 000000A 6 MSFT 0100000D)
[ 0.013116] ACPI: HPET 0x000000007EFF3000 000038 (v01 INTEL DN2800MT 000000A 6 MSFT 0100000D)
[ 0.013129] ACPI: SSDT 0x000000007EFF1000 000655 (v01 PmRef CpuPm 0000300 0 INTL 20061109)
[ 0.013142] ACPI: SSDT 0x000000007EFF0000 000259 (v01 PmRef Cpu0Tst 0000300 0 INTL 20061109)
[ 0.013155] ACPI: SSDT 0x000000007EFEF000 00020F (v01 PmRef ApTst 0000300 0 INTL 20061109)
[ 0.013168] ACPI: Reserving FACP table memory at [mem 0x7eff6000-0x7eff60f3]
[ 0.013172] ACPI: Reserving DSDT table memory at [mem 0x7eff8000-0x7effdcb9]
[ 0.013176] ACPI: Reserving FACS table memory at [mem 0x7ef85000-0x7ef8503f]
[ 0.013181] ACPI: Reserving FACS table memory at [mem 0x7ef85000-0x7ef8503f]
[ 0.013184] ACPI: Reserving SSDT table memory at [mem 0x7eff7000-0x7eff743d]
[ 0.013188] ACPI: Reserving APIC table memory at [mem 0x7eff5000-0x7eff5083]
[ 0.013192] ACPI: Reserving MCFG table memory at [mem 0x7eff4000-0x7eff403b]
[ 0.013196] ACPI: Reserving HPET table memory at [mem 0x7eff3000-0x7eff3037]
[ 0.013201] ACPI: Reserving SSDT table memory at [mem 0x7eff1000-0x7eff1654]
[ 0.013205] ACPI: Reserving SSDT table memory at [mem 0x7eff0000-0x7eff0258]
[ 0.013209] ACPI: Reserving SSDT table memory at [mem 0x7efef000-0x7efef20e]
[ 0.013240] ACPI: Local APIC address 0xfee00000
[ 0.013249] 1152MB HIGHMEM available.
[ 0.013252] 879MB LOWMEM available.
[ 0.013255] mapped low ram: 0 - 36ffe000
[ 0.013258] low ram: 0 - 36ffe000
[ 0.013271] Zone ranges:
[ 0.013274] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013279] Normal [mem 0x0000000001000000-0x0000000036ffdfff]
[ 0.013285] HighMem [mem 0x0000000036ffe000-0x000000007effffff]
[ 0.013290] Movable zone start for each node
[ 0.013292] Early memory node ranges
[ 0.013295] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.013299] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[ 0.013302] node 0: [mem 0x0000000000100000-0x000000007ee94fff]
[ 0.013306] node 0: [mem 0x000000007eebf000-0x000000007eef4fff]
[ 0.013309] node 0: [mem 0x000000007efbf000-0x000000007efeefff]
[ 0.013313] node 0: [mem 0x000000007efff000-0x000000007effffff]
[ 0.013318] Initmem setup node 0 [mem 0x0000000000001000-0x000000007effffff]
[ 0.013323] On node 0 totalpages: 519832
[ 0.034984] DMA zone: 40 pages used for memmap
[ 0.034990] DMA zone: 0 pages reserved
[ 0.034994] DMA zone: 3996 pages, LIFO batch:0
[ 0.035004] Normal zone: 2160 pages used for memmap
[ 0.035008] Normal zone: 221182 pages, LIFO batch:63
[ 0.035014] HighMem zone: 294654 pages, LIFO batch:63
[ 0.055111] Using APIC driver default
[ 0.055286] ACPI: PM-Timer IO Port: 0x408
[ 0.055295] ACPI: Local APIC address 0xfee00000
[ 0.055310] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.055314] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.055318] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.055321] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.055341] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.055347] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.055352] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.055358] ACPI: IRQ0 used by override.
[ 0.055362] ACPI: IRQ9 used by override.
[ 0.055368] Using ACPI (MADT) for SMP configuration information
[ 0.055373] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.055391] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.055457] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x0000 0fff]
[ 0.055464] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008 ffff]
[ 0.055470] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009 efff]
[ 0.055474] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009 ffff]
[ 0.055477] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000d ffff]
[ 0.055480] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000f ffff]
[ 0.055486] PM: hibernation: Registered nosave memory: [mem 0x7ee95000-0x7eeb efff]
[ 0.055493] PM: hibernation: Registered nosave memory: [mem 0x7eef5000-0x7efb efff]
[ 0.055499] PM: hibernation: Registered nosave memory: [mem 0x7efef000-0x7eff efff]
[ 0.055505] [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.055508] Booting paravirtualized kernel on bare hardware
[ 0.055520] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 7645519600211568 ns
[ 0.055538] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ ids:1
[ 0.057126] percpu: Embedded 36 pages/cpu s116428 r0 d31028 u147456
[ 0.057150] pcpu-alloc: s116428 r0 d31028 u147456 alloc=36*4096
[ 0.057155] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.057235] Built 1 zonelists, mobility grouping on. Total pages: 517632
[ 0.057241] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-21-686-pae r oot=UUID=90bb3e7b-83e7-4ef6-ac05-583df44b5f76 ro quiet
[ 0.057883] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.058153] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, li near)
[ 0.058233] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.058247] Initializing HighMem for node 0 (00036ffe:0007f000)
[ 0.209603] Initializing Movable for node 0 (00000000:00000000)
[ 0.218817] Memory: 2020476K/2079328K available (8315K kernel code, 1181K rwd ata, 2516K rodata, 888K init, 488K bss, 58852K reserved, 0K cma-reserved, 117861 6K highmem)
[ 0.218822] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.219904] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.219973] ftrace: allocating 33827 entries in 67 pages
[ 0.253947] ftrace: allocated 67 pages with 3 groups
[ 0.254487] rcu: Hierarchical RCU implementation.
[ 0.254496] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.254498] Rude variant of Tasks RCU enabled.
[ 0.254500] Tracing variant of Tasks RCU enabled.
[ 0.254504] rcu: RCU calculated value of scheduler-enlistment delay is 25 jif fies.
[ 0.254507] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.282663] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
[ 0.285258] Console: colour VGA+ 80x25
[ 0.285316] printk: console [tty0] enabled
[ 0.285338] ACPI: Core revision 20200925
[ 0.285587] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 133484882848 ns
[ 0.285615] APIC: Switch to symmetric I/O mode setup
[ 0.285620] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.286238] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.305618] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x35 d07735f96, max_idle_ns: 881590424110 ns
[ 0.305629] Calibrating delay loop (skipped), value calculated using timer fr equency.. 3733.36 BogoMIPS (lpj=7466736)
[ 0.305638] pid_max: default: 32768 minimum: 301
[ 0.305940] LSM: Security Framework initializing
[ 0.305993] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.306120] AppArmor: AppArmor initialized
[ 0.306126] TOMOYO Linux initialized
[ 0.306235] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linea r)
[ 0.306244] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.307164] Disabled fast string operations
[ 0.307201] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.307207] process: using mwait in idle threads
[ 0.307227] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.307231] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.307810] Freeing SMP alternatives memory: 32K
[ 0.418516] smpboot: CPU0: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz (family: 0 x6, model: 0x36, stepping: 0x1)
[ 0.419115] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PM U driver.
[ 0.419135] ... version: 3
[ 0.419138] ... bit width: 40
[ 0.419142] ... generic registers: 2
[ 0.419145] ... value mask: 000000ffffffffff
[ 0.419147] ... max period: 000000007fffffff
[ 0.419150] ... fixed-purpose events: 3
[ 0.419152] ... event mask: 0000000700000003
[ 0.419435] rcu: Hierarchical SRCU implementation.
[ 0.420690] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.420958] smp: Bringing up secondary CPUs ...
[ 0.421413] x86: Booting SMP configuration:
[ 0.421420] .... node #0, CPUs: #1
[ 0.006527] Disabled fast string operations
[ 0.422147] #2
[ 0.006527] Disabled fast string operations
[ 0.426063] #3
[ 0.006527] Disabled fast string operations
[ 0.428224] smp: Brought up 1 node, 4 CPUs
[ 0.428224] smpboot: Max logical packages: 1
[ 0.428224] smpboot: Total of 4 processors activated (14933.47 BogoMIPS)
[ 0.429867] devtmpfs: initialized
[ 0.430170] PM: Registering ACPI NVS region [mem 0x7eef5000-0x7efbefff] (8273 92 bytes)
[ 0.430170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns
[ 0.430170] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.430216] pinctrl core: initialized pinctrl subsystem
[ 0.431055] NET: Registered protocol family 16
[ 0.431394] audit: initializing netlink subsys (disabled)
[ 0.431435] audit: type=2000 audit(1677358282.144:1): state=initialized audit _enabled=0 res=1
[ 0.431435] thermal_sys: Registered thermal governor 'fair_share'
[ 0.431435] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.431435] thermal_sys: Registered thermal governor 'step_wise'
[ 0.431435] thermal_sys: Registered thermal governor 'user_space'
[ 0.431435] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.431435] cpuidle: using governor ladder
[ 0.431435] cpuidle: using governor menu
[ 0.431435] ACPI FADT declares the system doesn't support PCIe ASPM, so disab le it
[ 0.431435] ACPI: bus type PCI registered
[ 0.431435] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.433799] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3 ffffff] (base 0xe0000000)
[ 0.433809] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.433811] PCI: Using MMCONFIG for extended config space
[ 0.433822] PCI: Using configuration type 1 for base access
[ 0.437879] Kprobes globally optimized
[ 0.437903] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 2.334681] ACPI: Added _OSI(Module Device)
[ 2.334681] ACPI: Added _OSI(Processor Device)
[ 2.334681] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 2.334681] ACPI: Added _OSI(Processor Aggregator Device)
[ 2.334681] ACPI: Added _OSI(Linux-Dell-Video)
[ 2.334681] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 2.334681] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 2.345736] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 2.347895] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 2.349087] ACPI: Dynamic OEM Table Load:
[ 2.349107] ACPI: SSDT 0x00000000C11D9C00 0002A7 (v01 PmRef Cpu0Ist 0000300 0 INTL 20061109)
[ 2.350502] ACPI: Dynamic OEM Table Load:
[ 2.350522] ACPI: SSDT 0x00000000C13B5800 0006D5 (v01 PmRef Cpu0Cst 0000300 1 INTL 20061109)
[ 2.352501] ACPI: Dynamic OEM Table Load:
[ 2.352516] ACPI: SSDT 0x00000000C133AC00 0001CF (v01 PmRef ApIst 0000300 0 INTL 20061109)
[ 2.353582] ACPI: Dynamic OEM Table Load:
[ 2.353595] ACPI: SSDT 0x00000000C1251540 00008D (v01 PmRef ApCst 0000300 0 INTL 20061109)
[ 2.356418] ACPI: Interpreter enabled
[ 2.356489] ACPI: (supports S0 S3 S4 S5)
[ 2.356495] ACPI: Using IOAPIC for interrupt routing
[ 2.356592] PCI: Using host bridge windows from ACPI; if necessary, use "pci= nocrs" and report a bug
[ 2.357146] ACPI: Enabled 15 GPEs in block 00 to 1F
[ 2.378153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.378169] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S egments MSI HPX-Type3]
[ 2.378294] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 2.378304] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0 0-3f] only partially covers this bridge
[ 2.379109] PCI host bridge to bus 0000:00
[ 2.379117] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 2.379123] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 2.379128] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win dow]
[ 2.379133] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff win dow]
[ 2.379137] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff win dow]
[ 2.379142] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff win dow]
[ 2.379147] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff win dow]
[ 2.379152] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff win dow]
[ 2.379156] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff win dow]
[ 2.379162] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.379201] pci 0000:00:00.0: [8086:0bf2] type 00 class 0x060000
[ 2.379522] pci 0000:00:02.0: [8086:0be2] type 00 class 0x030000
[ 2.379538] pci 0000:00:02.0: reg 0x10: [mem 0x80600000-0x806fffff]
[ 2.379547] pci 0000:00:02.0: reg 0x14: [io 0x30d0-0x30d7]
[ 2.379876] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 2.379904] pci 0000:00:1b.0: reg 0x10: [mem 0x80800000-0x80803fff 64bit]
[ 2.380026] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.380336] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 2.380473] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.380811] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 2.380942] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 2.381236] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 2.381299] pci 0000:00:1d.0: reg 0x20: [io 0x30a0-0x30bf]
[ 2.381597] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 2.381686] pci 0000:00:1d.1: reg 0x20: [io 0x3080-0x309f]
[ 2.381983] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 2.382060] pci 0000:00:1d.2: reg 0x20: [io 0x3060-0x307f]
[ 2.382354] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 2.382430] pci 0000:00:1d.3: reg 0x20: [io 0x3040-0x305f]
[ 2.382749] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 2.382775] pci 0000:00:1d.7: reg 0x10: [mem 0x80704400-0x807047ff]
[ 2.382888] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 2.383182] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 2.383506] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 2.383615] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 2.383918] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 2.383941] pci 0000:00:1f.2: reg 0x10: [io 0x30c8-0x30cf]
[ 2.383955] pci 0000:00:1f.2: reg 0x14: [io 0x30dc-0x30df]
[ 2.383968] pci 0000:00:1f.2: reg 0x18: [io 0x30c0-0x30c7]
[ 2.383980] pci 0000:00:1f.2: reg 0x1c: [io 0x30d8-0x30db]
[ 2.383994] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x302f]
[ 2.384008] pci 0000:00:1f.2: reg 0x24: [mem 0x80704000-0x807043ff]
[ 2.384064] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.384322] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 2.384397] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
[ 2.384866] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000
[ 2.384906] pci 0000:01:00.0: reg 0x10: [mem 0x80400000-0x8041ffff]
[ 2.384929] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x803fffff]
[ 2.384950] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x201f]
[ 2.384973] pci 0000:01:00.0: reg 0x1c: [mem 0x80420000-0x80423fff]
[ 2.385165] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.385471] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.385479] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 2.385486] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x804fffff]
[ 2.385690] pci 0000:02:00.0: [8086:0894] type 00 class 0x028000
[ 2.385739] pci 0000:02:00.0: reg 0x10: [mem 0x80500000-0x80501fff 64bit]
[ 2.385954] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.386247] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 2.386258] pci 0000:00:1c.3: bridge window [mem 0x80500000-0x805fffff]
[ 2.386293] pci_bus 0000:03: extended config space not accessible
[ 2.386436] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 2.386452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (sub tractive decode)
[ 2.386458] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (sub tractive decode)
[ 2.386463] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff wind ow] (subtractive decode)
[ 2.386468] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff wind ow] (subtractive decode)
[ 2.386473] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff wind ow] (subtractive decode)
[ 2.386478] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff wind ow] (subtractive decode)
[ 2.386483] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0x7fffffff wind ow] (subtractive decode)
[ 2.386488] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff wind ow] (subtractive decode)
[ 2.386493] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff wind ow] (subtractive decode)
[ 2.386519] pci_bus 0000:00: on NUMA node 0
[ 2.388075] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *1 1
[ 2.388272] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0 , disabled.
[ 2.388472] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *9
[ 2.388690] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *1 0
[ 2.388883] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0 , disabled.
[ 2.389076] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0 , disabled.
[ 2.389271] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *9
[ 2.389464] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 2.390251] iommu: Default domain type: Translated
[ 2.390331] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 2.390331] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=i o+mem,locks=none
[ 2.390331] pci 0000:00:02.0: vgaarb: bridge control possible
[ 2.390331] vgaarb: loaded
[ 2.390331] EDAC MC: Ver: 3.0.0
[ 2.390331] NetLabel: Initializing
[ 2.390331] NetLabel: domain hash size = 128
[ 2.390331] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 2.390331] NetLabel: unlabeled traffic allowed by default
[ 2.390331] PCI: Using ACPI for IRQ routing
[ 2.393860] PCI: pci_cache_line_size set to 64 bytes
[ 2.393943] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 2.393949] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 2.393953] e820: reserve RAM buffer [mem 0x7ee95000-0x7fffffff]
[ 2.393958] e820: reserve RAM buffer [mem 0x7eef5000-0x7fffffff]
[ 2.393961] e820: reserve RAM buffer [mem 0x7efef000-0x7fffffff]
[ 2.393965] e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
[ 2.394055] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 2.394068] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 2.396143] clocksource: Switched to clocksource tsc-early
[ 2.442875] VFS: Disk quotas dquot_6.6.0
[ 2.442941] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.443432] AppArmor: AppArmor Filesystem Enabled
[ 2.443524] pnp: PnP ACPI init
[ 2.443980] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 2.444005] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (act ive)
[ 2.444169] system 00:01: [io 0x0680-0x069f] has been reserved
[ 2.444176] system 00:01: [io 0x1000-0x100f] has been reserved
[ 2.444199] system 00:01: [io 0xffff] has been reserved
[ 2.444205] system 00:01: [io 0xffff] has been reserved
[ 2.444211] system 00:01: [io 0x0400-0x047f] has been reserved
[ 2.444216] system 00:01: [io 0x0500-0x057f] has been reserved
[ 2.444221] system 00:01: [io 0x0600-0x061f] has been reserved
[ 2.444240] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.444398] system 00:02: [io 0x06a0-0x06af] has been reserved
[ 2.444405] system 00:02: [io 0x06b0-0x06ff] has been reserved
[ 2.444423] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.444522] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.445116] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 2.445798] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.446301] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.446703] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.446711] system 00:07: [mem 0x00000000-0x00003fff] could not be reserved
[ 2.446717] system 00:07: [mem 0x00000000-0x00000fff] could not be reserved
[ 2.446722] system 00:07: [mem 0x00000000-0x00000fff] could not be reserved
[ 2.446728] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.446748] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.447138] pnp: PnP ACPI: found 8 devices
[ 2.447144] PnPBIOS: Disabled
[ 2.488713] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id le_ns: 2085701024 ns
[ 2.488989] NET: Registered protocol family 2
[ 2.489129] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line ar)
[ 2.489991] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 2.490125] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 2.490194] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 2.490246] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.490407] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 2.490438] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 2.490637] NET: Registered protocol family 1
[ 2.490656] NET: Registered protocol family 44
[ 2.490692] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 2.490701] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 02] a dd_size 1000
[ 2.490708] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 2.490765] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80900000-0x80afffff 64b it pref]
[ 2.490784] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80b00000-0x80cfffff 64b it pref]
[ 2.490794] pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 2.490804] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.490812] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 2.490823] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x804fffff]
[ 2.490831] pci 0000:00:1c.0: bridge window [mem 0x80900000-0x80afffff 64bi t pref]
[ 2.490840] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 2.490846] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 2.490855] pci 0000:00:1c.3: bridge window [mem 0x80500000-0x805fffff]
[ 2.490862] pci 0000:00:1c.3: bridge window [mem 0x80b00000-0x80cfffff 64bi t pref]
[ 2.490873] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 2.490891] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 2.490896] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 2.490901] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 2.490905] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 2.490910] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[ 2.490914] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[ 2.490919] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[ 2.490924] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[ 2.490928] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window]
[ 2.490933] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 2.490938] pci_bus 0000:01: resource 1 [mem 0x80000000-0x804fffff]
[ 2.490942] pci_bus 0000:01: resource 2 [mem 0x80900000-0x80afffff 64bit pref ]
[ 2.490947] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 2.490952] pci_bus 0000:02: resource 1 [mem 0x80500000-0x805fffff]
[ 2.490956] pci_bus 0000:02: resource 2 [mem 0x80b00000-0x80cfffff 64bit pref ]
[ 2.490961] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 2.490966] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 2.490971] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 2.490975] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[ 2.490980] pci_bus 0000:03: resource 8 [mem 0x000e0000-0x000effff window]
[ 2.490984] pci_bus 0000:03: resource 9 [mem 0x000f0000-0x000fffff window]
[ 2.490989] pci_bus 0000:03: resource 10 [mem 0x7f800000-0x7fffffff window]
[ 2.490994] pci_bus 0000:03: resource 11 [mem 0x80000000-0xfebfffff window]
[ 2.490999] pci_bus 0000:03: resource 12 [mem 0xfed40000-0xfed44fff window]
[ 2.491194] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c00 00-0x000dffff]
[ 2.513881] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x740 took 21103 us ecs
[ 2.513928] PCI: CLS 64 bytes, default 64
[ 2.514168] Trying to unpack rootfs image as initramfs...
[ 3.554368] Freeing initrd memory: 22984K
[ 3.556197] Initialise system trusted keyrings
[ 3.556235] Key type blacklist registered
[ 3.556408] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 3.561039] zbud: loaded
[ 3.561766] integrity: Platform Keyring initialized
[ 3.561780] Key type asymmetric registered
[ 3.561783] Asymmetric key parser 'x509' registered
[ 3.561916] bounce: pool size: 64 pages
[ 3.561997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 51)
[ 3.562174] io scheduler mq-deadline registered
[ 3.565100] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.565148] intel_idle: MWAIT substates: 0x3020220
[ 3.565152] intel_idle: v0.5.1 model 0x36
[ 3.565945] intel_idle: Local APIC timer is reliable in all C-states
[ 3.570754] isapnp: Scanning for PnP cards...
[ 3.924310] isapnp: No Plug & Play device found
[ 3.924604] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.924890] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 1655 0A
[ 3.925787] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655 0A
[ 3.927484] Linux agpgart interface v0.103
[ 3.928645] i8042: PNP: No PS/2 controller found.
[ 3.928897] mousedev: PS/2 mouse device common for all mice
[ 3.929006] rtc_cmos 00:03: RTC can wake from S4
[ 3.929561] rtc_cmos 00:03: registered as rtc0
[ 3.929662] rtc_cmos 00:03: setting system clock to 2023-02-25T20:51:26 UTC ( 1677358286)
[ 3.929758] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpe t irqs
[ 3.929792] intel_pstate: CPU model not supported
[ 3.929944] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.931074] NET: Registered protocol family 10
[ 3.959302] Segment Routing with IPv6
[ 3.959396] mip6: Mobile IPv6
[ 3.959403] NET: Registered protocol family 17
[ 3.959547] mpls_gso: MPLS GSO support
[ 3.960281] microcode: sig=0x30661, pf=0x8, revision=0x10d
[ 3.960334] microcode: Microcode Update Driver: v2.2.
[ 3.960346] IPI shorthand broadcast: enabled
[ 3.960377] sched_clock: Marking stable (3957570959, 2527957)->(3964607617, - 4508701)
[ 3.960703] registered taskstats version 1
[ 3.960714] Loading compiled-in X.509 certificates
[ 4.384954] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3d d27dfcc5cbb419ea1'
[ 4.385034] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 140112 49c2675ea8e5148542202005810584b25f'
[ 4.385155] zswap: loaded using pool lzo/zbud
[ 4.385690] Key type .fscrypt registered
[ 4.385695] Key type fscrypt-provisioning registered
[ 4.385900] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.389815] Freeing unused kernel image (initmem) memory: 888K
[ 4.409793] Write protecting kernel text and read-only data: 10832k
[ 4.409797] NX-protecting the kernel data: 6020k
[ 4.410711] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.410724] Run /init as init process
[ 4.410728] with arguments:
[ 4.410730] /init
[ 4.410733] with environment:
[ 4.410736] HOME=/
[ 4.410739] TERM=linux
[ 4.410741] BOOT_IMAGE=/boot/vmlinuz-5.10.0-21-686-pae
[ 4.573699] tsc: Refined TSC clocksource calibration: 1866.666 MHz
[ 4.573726] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35d05546 1d7, max_idle_ns: 881590757721 ns
[ 4.573782] clocksource: Switched to clocksource tsc
[ 4.728772] pps_core: LinuxPPS API ver. 1 registered
[ 4.728779] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
[ 4.735739] PTP clock support registered
[ 4.763612] ACPI: bus type USB registered
[ 4.763720] usbcore: registered new interface driver usbfs
[ 4.763768] usbcore: registered new interface driver hub
[ 4.763824] usbcore: registered new device driver usb
[ 4.776697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.777932] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042 F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (2020092 5/utaddress-204)
[ 4.777956] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042 F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (2020092 5/utaddress-204)
[ 4.777973] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.777980] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053 F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (2020092 5/utaddress-204)
[ 4.777996] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.778001] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052 F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (2020092 5/utaddress-204)
[ 4.778016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.778020] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.785715] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.786086] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.786111] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus numbe r 1
[ 4.786132] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 4.786196] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0
[ 4.786463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bc dDevice= 5.10
[ 4.786472] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 4.786478] usb usb1: Product: UHCI Host Controller
[ 4.786484] usb usb1: Manufacturer: Linux 5.10.0-21-686-pae uhci_hcd
[ 4.786489] usb usb1: SerialNumber: 0000:00:1d.0
[ 4.787083] hub 1-0:1.0: USB hub found
[ 4.787115] hub 1-0:1.0: 2 ports detected
[ 4.787814] e1000e: Intel(R) PRO/1000 Network Driver
[ 4.787820] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.790556] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.790586] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus numbe r 2
[ 4.790646] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 4.790710] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.790719] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003080
[ 4.790996] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bc dDevice= 5.10
[ 4.791004] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 4.791010] usb usb2: Product: UHCI Host Controller
[ 4.791017] usb usb2: Manufacturer: Linux 5.10.0-21-686-pae uhci_hcd
[ 4.791022] usb usb2: SerialNumber: 0000:00:1d.1
[ 4.791589] hub 2-0:1.0: USB hub found
[ 4.791621] hub 2-0:1.0: 2 ports detected
[ 4.792605] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.792648] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus numbe r 3
[ 4.792667] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 4.792746] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003060
[ 4.793017] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bc dDevice= 5.10
[ 4.793025] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 4.793030] usb usb3: Product: UHCI Host Controller
[ 4.793036] usb usb3: Manufacturer: Linux 5.10.0-21-686-pae uhci_hcd
[ 4.793041] usb usb3: SerialNumber: 0000:00:1d.2
[ 4.793567] hub 3-0:1.0: USB hub found
[ 4.793602] hub 3-0:1.0: 2 ports detected
[ 4.794756] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.794780] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus numbe r 4
[ 4.794800] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 4.794863] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003040
[ 4.795131] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bc dDevice= 5.10
[ 4.795141] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 4.795146] usb usb4: Product: UHCI Host Controller
[ 4.795152] usb usb4: Manufacturer: Linux 5.10.0-21-686-pae uhci_hcd
[ 4.795157] usb usb4: SerialNumber: 0000:00:1d.3
[ 4.795702] hub 4-0:1.0: USB hub found
[ 4.802896] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.803653] i2c i2c-0: 1/2 memory slots populated (from DMI)
[ 4.810543] hub 4-0:1.0: 2 ports detected
[ 4.811254] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 4.821411] SCSI subsystem initialized
[ 4.821763] ehci-pci: EHCI PCI platform driver
[ 4.846505] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock
[ 4.852961] libata version 3.00 loaded.
[ 4.870713] ahci 0000:00:1f.2: version 3.0
[ 4.871179] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 4.871225] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 imp l SATA mode
[ 4.871232] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[ 4.873204] scsi host0: ahci
[ 4.874354] scsi host1: ahci
[ 4.875328] scsi host2: ahci
[ 4.878584] scsi host3: ahci
[ 4.878975] ata1: SATA max UDMA/133 abar m1024@0x80704000 port 0x80704100 irq 27
[ 4.878987] ata2: SATA max UDMA/133 abar m1024@0x80704000 port 0x80704180 irq 27
[ 4.878992] ata3: DUMMY
[ 4.878996] ata4: DUMMY
[ 4.879144] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.879172] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus numbe r 5
[ 4.879207] ehci-pci 0000:00:1d.7: debug port 1
[ 4.883203] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 4.883227] ehci-pci 0000:00:1d.7: irq 23, io mem 0x80704400
[ 4.897746] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.898019] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.10
Zuletzt geändert von Fabse1988 am 25. Feb 2023 22:07, insgesamt 1-mal geändert.
-
Fabse1988
- Beiträge: 22
- Registriert: 10. Feb 2023 21:40
Re: Enocean und das Große Fragezeichen ???
auf grund der länge musste ich es in zwei teile machen.
was mich jetzt gewundert hat ist das vorhin nach einer stunde vielleicht auch etwas länger einfach der server ausging.
Code: Alles auswählen
dDevice= 5.10
[ 4.898025] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 4.898030] usb usb5: Product: EHCI Host Controller
[ 4.898033] usb usb5: Manufacturer: Linux 5.10.0-21-686-pae ehci_hcd
[ 4.898037] usb usb5: SerialNumber: 0000:00:1d.7
[ 4.898543] hub 5-0:1.0: USB hub found
[ 4.898590] hub 5-0:1.0: 8 ports detected
[ 4.900258] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d :af:da:b6
[ 4.900266] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.900284] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 4.925916] hub 1-0:1.0: USB hub found
[ 4.925970] hub 1-0:1.0: 2 ports detected
[ 4.953944] hub 2-0:1.0: USB hub found
[ 4.953997] hub 2-0:1.0: 2 ports detected
[ 4.981939] hub 3-0:1.0: USB hub found
[ 4.981992] hub 3-0:1.0: 2 ports detected
[ 5.009922] hub 4-0:1.0: USB hub found
[ 5.009977] hub 4-0:1.0: 2 ports detected
[ 5.196674] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.198954] ata1.00: supports DRM functions and may not be fully accessible
[ 5.200042] ata1.00: NCQ Send/Recv Log not supported
[ 5.200058] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
[ 5.200073] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 5.201804] ata1.00: supports DRM functions and may not be fully accessible
[ 5.202339] ata1.00: NCQ Send/Recv Log not supported
[ 5.203595] ata1.00: configured for UDMA/133
[ 5.204033] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ : 0 ANSI: 5
[ 5.369717] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 5.518805] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.529823] e1000e 0000:01:00.0 eno0: renamed from eth0
[ 5.553283] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 5.553352] sd 0:0:0:0: [sda] Write Protect is off
[ 5.553362] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.553469] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
[ 5.566779] usb 3-1: New USB device found, idVendor=046d, idProduct=c051, bcd Device=30.00
[ 5.566797] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.566810] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 5.566814] usb 3-1: Manufacturer: Logitech
[ 5.581468] sda: sda1 sda2 < sda5 >
[ 5.588849] hid: raw HID events driver (C) Jiri Kosina
[ 5.610926] sd 0:0:0:0: [sda] supports TCG Opal
[ 5.610934] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.638129] usbcore: registered new interface driver usbhid
[ 5.638134] usbhid: USB HID core driver
[ 5.648097] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/000 0:00:1d.2/usb3/3-1/3-1:1.0/0003:046D:C051.0001/input/input0
[ 5.649526] hid-generic 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mou se [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 8.125763] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[ 8.125792] usb 5-8: new high-speed USB device number 4 using ehci-pci
[ 8.506087] usb 5-8: New USB device found, idVendor=058f, idProduct=6254, bcd Device= 1.00
[ 8.506102] usb 5-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.506689] hub 5-8:1.0: USB hub found
[ 8.506801] hub 5-8:1.0: 4 ports detected
[ 8.541766] usb 3-2: New USB device found, idVendor=046a, idProduct=b090, bcd Device= 1.03
[ 8.541774] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.541778] usb 3-2: Product: USB keyboard
[ 8.541782] usb 3-2: Manufacturer: Cherry
[ 8.561814] input: Cherry USB keyboard as /devices/pci0000:00/0000:00:1d.2/us b3/3-2/3-2:1.0/0003:046A:B090.0002/input/input1
[ 8.622176] hid-generic 0003:046A:B090.0002: input,hidraw1: USB HID v1.11 Key board [Cherry USB keyboard] on usb-0000:00:1d.2-2/input0
[ 8.650630] input: Cherry USB keyboard System Control as /devices/pci0000:00/ 0000:00:1d.2/usb3/3-2/3-2:1.1/0003:046A:B090.0003/input/input2
[ 8.709843] input: Cherry USB keyboard Consumer Control as /devices/pci0000:0 0/0000:00:1d.2/usb3/3-2/3-2:1.1/0003:046A:B090.0003/input/input3
[ 8.710168] hid-generic 0003:046A:B090.0003: input,hiddev0,hidraw2: USB HID v 1.11 Device [Cherry USB keyboard] on usb-0000:00:1d.2-2/input1
[ 8.829799] usb 5-8.2: new full-speed USB device number 5 using ehci-pci
[ 8.948597] usb 5-8.2: New USB device found, idVendor=0403, idProduct=6010, b cdDevice= 5.00
[ 8.948614] usb 5-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber =3
[ 8.948623] usb 5-8.2: Product: FAM V2.4
[ 8.948632] usb 5-8.2: Manufacturer: Eltako GmbH
[ 8.948646] usb 5-8.2: SerialNumber: FTYIAKQS
[ 9.041447] PM: Image not found (code -22)
[ 10.409172] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.557804] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 11.772429] systemd[1]: Inserted module 'autofs4'
[ 12.270313] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +G NUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 defa ult-hierarchy=unified)
[ 12.289938] systemd[1]: Detected architecture x86.
[ 12.290818] systemd[1]: Set hostname to <openhabian>.
[ 13.026620] systemd[1]: Queued start job for default target Graphical Interfa ce.
[ 13.027808] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.031014] systemd[1]: Created slice system-getty.slice.
[ 13.031292] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.032443] systemd[1]: Created slice system-modprobe.slice.
[ 13.032570] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.033707] systemd[1]: Created slice User and Session Slice.
[ 13.034304] systemd[1]: Started Dispatch Password Requests to Console Directo ry Watch.
[ 13.034663] systemd[1]: Started Forward Password Requests to Wall Directory W atch.
[ 13.035517] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point.
[ 13.035775] systemd[1]: Reached target Local Encrypted Volumes.
[ 13.036107] systemd[1]: Reached target Paths.
[ 13.036268] systemd[1]: Reached target Remote File Systems.
[ 13.036388] systemd[1]: Reached target Slices.
[ 13.037207] systemd[1]: Listening on Syslog Socket.
[ 13.037888] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 13.038252] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 13.039101] systemd[1]: Listening on Journal Audit Socket.
[ 13.039705] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.040432] systemd[1]: Listening on Journal Socket.
[ 13.041519] systemd[1]: Listening on udev Control Socket.
[ 13.042221] systemd[1]: Listening on udev Kernel Socket.
[ 13.045572] systemd[1]: Mounting Huge Pages File System...
[ 13.049324] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.053689] systemd[1]: Mounting Kernel Debug File System...
[ 13.059758] systemd[1]: Mounting Kernel Trace File System...
[ 13.066126] systemd[1]: Starting Set the console keyboard layout...
[ 13.071445] systemd[1]: Starting Create list of static device nodes for the c urrent kernel...
[ 13.077352] systemd[1]: Starting Load Kernel Module configfs...
[ 13.083396] systemd[1]: Starting Load Kernel Module drm...
[ 13.089427] systemd[1]: Starting Load Kernel Module fuse...
[ 13.094746] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 13.095070] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 13.106209] systemd[1]: Starting Journal Service...
[ 13.122530] systemd[1]: Starting Load Kernel Modules...
[ 13.127026] fuse: init (API version 7.32)
[ 13.127942] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.133306] systemd[1]: Starting Coldplug All udev Devices...
[ 13.146404] systemd[1]: Mounted Huge Pages File System.
[ 13.147143] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.147863] systemd[1]: Mounted Kernel Debug File System.
[ 13.148623] systemd[1]: Mounted Kernel Trace File System.
[ 13.150721] systemd[1]: Finished Create list of static device nodes for the c urrent kernel.
[ 13.152973] systemd[1]: modprobe@configfs.service: Succeeded.
[ 13.156419] systemd[1]: Finished Load Kernel Module configfs.
[ 13.158505] systemd[1]: modprobe@fuse.service: Succeeded.
[ 13.160023] systemd[1]: Finished Load Kernel Module fuse.
[ 13.165998] systemd[1]: Mounting FUSE Control File System...
[ 13.171583] systemd[1]: Mounting Kernel Configuration File System...
[ 13.183303] systemd[1]: modprobe@drm.service: Succeeded.
[ 13.184771] systemd[1]: Finished Load Kernel Module drm.
[ 13.190249] systemd[1]: Mounted FUSE Control File System.
[ 13.198614] systemd[1]: Mounted Kernel Configuration File System.
[ 13.203257] systemd[1]: Finished Load Kernel Modules.
[ 13.208385] systemd[1]: Starting Apply Kernel Variables...
[ 13.212439] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.225067] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 13.234351] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 13.234690] systemd[1]: Condition check resulted in Platform Persistent Stora ge Archival being skipped.
[ 13.239366] systemd[1]: Starting Load/Save Random Seed...
[ 13.246346] systemd[1]: Starting Create System Users...
[ 13.275230] systemd[1]: Finished Apply Kernel Variables.
[ 13.331480] systemd[1]: Finished Create System Users.
[ 13.346593] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.469269] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 13.478770] systemd[1]: Starting Rule-based Manager for Device Events and Fil es...
[ 13.514455] systemd[1]: Finished Set the console keyboard layout.
[ 13.515092] systemd[1]: Reached target Local File Systems (Pre).
[ 13.515278] systemd[1]: Reached target Local File Systems.
[ 13.520175] systemd[1]: Starting Load AppArmor profiles...
[ 13.525347] systemd[1]: Starting Set console font and keymap...
[ 13.575632] systemd[1]: Finished Set console font and keymap.
[ 13.649190] systemd[1]: Started Rule-based Manager for Device Events and File s.
[ 13.691253] audit: type=1400 audit(1677358296.256:2): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="lsb_release" pid=245 comm="apparm or_parser"
[ 13.692168] audit: type=1400 audit(1677358296.256:3): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/bin/man" pid=244 comm="appar mor_parser"
[ 13.692191] audit: type=1400 audit(1677358296.256:4): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="man_filter" pid=244 comm="apparmo r_parser"
[ 13.692210] audit: type=1400 audit(1677358296.256:5): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="man_groff" pid=244 comm="apparmor _parser"
[ 13.693675] audit: type=1400 audit(1677358296.256:6): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="nvidia_modprobe" pid=243 comm="ap parmor_parser"
[ 13.693700] audit: type=1400 audit(1677358296.256:7): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=243 co mm="apparmor_parser"
[ 13.701517] systemd[1]: Finished Load AppArmor profiles.
[ 13.793294] systemd[1]: Started Journal Service.
[ 13.850729] systemd-journald[219]: Received client request to flush runtime j ournal.
[ 13.876233] systemd-journald[219]: File /var/log/journal/8a0334ea718847fc80a4 ba91e6744db7/system.journal corrupted or uncleanly shut down, renaming and repla cing.
[ 13.920575] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0 0/input/input4
[ 13.933846] ACPI: Power Button [PWRB]
[ 13.934134] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:0 0/input/input5
[ 13.934312] ACPI: Sleep Button [SLPB]
[ 13.934590] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut6
[ 13.941925] ACPI: Power Button [PWRF]
[ 14.022874] parport_pc 00:04: reported by Plug and Play ACPI
[ 14.023064] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 14.216822] random: systemd: uninitialized urandom read (16 bytes read)
[ 14.221544] random: systemd-journal: uninitialized urandom read (16 bytes rea d)
[ 14.237235] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase
[ 14.238508] random: systemd-journal: uninitialized urandom read (16 bytes rea d)
[ 14.241042] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e8208 21ba7b54b4961b8b4fadf'
[ 14.247835] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146 e09d1b6016ab9d6cf71dd233f0328'
[ 14.253530] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 14.253912] iTCO_vendor_support: vendor-support=0
[ 14.254533] platform regulatory.0: firmware: direct-loading firmware regulato ry.db
[ 14.254939] platform regulatory.0: firmware: direct-loading firmware regulato ry.db.p7s
[ 14.259148] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 14.269033] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.270827] usbcore: registered new interface driver usbserial_generic
[ 14.270857] at24 0-0051: supply vcc not found, using dummy regulator
[ 14.270880] usbserial: USB Serial support registered for generic
[ 14.288248] pmd_set_huge: Cannot satisfy [mem 0x7f800000-0x7fa00000] with a h uge-page mapping due to MTRR override.
[ 14.290320] at24 0-0051: 256 byte spd EEPROM, read-only
[ 14.309038] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.309142] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
[ 14.313322] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 14.315722] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.318613] acpi device:30: registered as cooling_device4
[ 14.318869] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/L NXVIDEO:00/input/input8
[ 14.321850] Intel(R) Wireless WiFi driver for Linux
[ 14.322294] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM co ntrol
[ 14.322934] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-105-6.ucod e (-2)
[ 14.323009] firmware_class: See https://wiki.debian.org/Firmware for informat ion about missing firmware
[ 14.323080] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-105-6.ucod e failed with error -2
[ 14.323198] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-105-5.ucod e (-2)
[ 14.323267] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-105-5.ucod e failed with error -2
[ 14.323281] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-105-5
[ 14.323345] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-105-6
[ 14.323408] iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/ke rnel/git/firmware/linux-firmware.git
[ 14.325273] usbcore: registered new interface driver ftdi_sio
[ 14.325334] usbserial: USB Serial support registered for FTDI USB Serial Devi ce
[ 14.325566] ftdi_sio 5-8.2:1.0: FTDI USB Serial Device converter detected
[ 14.325869] usb 5-8.2: Detected FT2232C
[ 14.330298] usb 5-8.2: FTDI USB Serial Device converter now attached to ttyUS B0
[ 14.330481] ftdi_sio 5-8.2:1.1: FTDI USB Serial Device converter detected
[ 14.330602] usb 5-8.2: Detected FT2232C
[ 14.337041] usb 5-8.2: FTDI USB Serial Device converter now attached to ttyUS B1
[ 14.634161] fbcon: gma500drmfb (fb0) is primary device
[ 14.740022] ppdev: user-space parallel port driver
[ 14.760437] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888-VD: line _outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 14.760446] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=1 (0x15/0x0/0x 0/0x0/0x0)
[ 14.760452] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0 /0x0)
[ 14.760457] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 14.760462] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 14.760466] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 14.760473] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 14.760479] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 14.760484] snd_hda_codec_realtek hdaudioC0D2: Internal Mic=0x12
[ 14.829719] Adding 998396k swap on /dev/sda5. Priority:-2 extents:1 across:9 98396k SSFS
[ 14.841234] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b. 0/sound/card0/input9
[ 14.843257] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sou nd/card0/input10
[ 14.844830] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sou nd/card0/input11
[ 14.845159] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sou nd/card0/input12
[ 15.121667] random: crng init done
[ 15.121672] random: 151 urandom warning(s) missed due to ratelimiting
[ 15.169161] Console: switching to colour frame buffer device 240x67
[ 15.184494] gma500 0000:00:02.0: [drm] fb0: gma500drmfb frame buffer device
[ 15.212813] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0
[ 17.598708] e1000e 0000:01:00.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, F low Control: Rx/Tx
[ 17.599054] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[ 62.802833] perf: interrupt took too long (2503 > 2500), lowering kernel.perf _event_max_sample_rate to 79750
[ 77.241975] perf: interrupt took too long (3139 > 3128), lowering kernel.perf _event_max_sample_rate to 63500
[ 127.437826] perf: interrupt took too long (3929 > 3923), lowering kernel.perf _event_max_sample_rate to 50750
[ 141.609904] systemd-journald[219]: File /var/log/journal/8a0334ea718847fc80a4 ba91e6744db7/user-1000.journal corrupted or uncleanly shut down, renaming and re placing.-
Fabse1988
- Beiträge: 22
- Registriert: 10. Feb 2023 21:40
Re: Enocean und das Große Fragezeichen ???
sehr interessant habe mal alexa hinzugefügt und war überrascht das er vieles erkannt hat vom wibutler skill kann auch schon lampen schalten.
allerdings erkennt er nicht alles Jalousien überhaupt nicht obwohl ich die in der alexa app sehen kann.
also wenn die noch erkannt würden bräuchte ich ja die aktoren überhaubt nicht anlernen.
allerdings erkennt er nicht alles Jalousien überhaupt nicht obwohl ich die in der alexa app sehen kann.
also wenn die noch erkannt würden bräuchte ich ja die aktoren überhaubt nicht anlernen.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
-
udo1toni
- Beiträge: 15241
- Registriert: 11. Apr 2018 18:05
- Wohnort: Darmstadt
Re: Enocean und das Große Fragezeichen ???
Ja, cool.
Interessanterweise bietet die Baugruppe zwei serielle Schnittstellen an, und zwar unter den Devicenamen
/dev/ttyUSB0 und /dev/ttyUSB1. Siehe lsusb:
Und zwei Ausschnitten aus dmesg:
Das heißt, in der Theorie solltest Du EnOcean mindestens über eines der beiden Devices erreichen können.
Installiere das EnOcean Binding und schau, ob Du in der Main UI die beiden seriellen Schnittstellen auswählen kannst. Ist das nicht der Fall, müssen wir erst noch dafür sorgen, dass die Schnittstellen in openHAB zur Verfügung stehen (was kein großes Problem ist).
Interessanterweise bietet die Baugruppe zwei serielle Schnittstellen an, und zwar unter den Devicenamen
/dev/ttyUSB0 und /dev/ttyUSB1. Siehe lsusb:
Code: Alles auswählen
Bus 002 Device 005: ID 0403:6010 Future Technology Devices International, Ltd FT2232C/D/H Dual UART/FIFO ICCode: Alles auswählen
[ 8.829799] usb 5-8.2: new full-speed USB device number 5 using ehci-pci
[ 8.948597] usb 5-8.2: New USB device found, idVendor=0403, idProduct=6010, bcdDevice= 5.00
[ 8.948614] usb 5-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.948623] usb 5-8.2: Product: FAM V2.4
[ 8.948632] usb 5-8.2: Manufacturer: Eltako GmbH
[ 8.948646] usb 5-8.2: SerialNumber: FTYIAKQS
[ 14.325273] usbcore: registered new interface driver ftdi_sio
[ 14.325334] usbserial: USB Serial support registered for FTDI USB Serial Deevice
[ 14.325566] ftdi_sio 5-8.2:1.0: FTDI USB Serial Device converter detected
[ 14.325869] usb 5-8.2: Detected FT2232C
[ 14.330298] usb 5-8.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 14.330481] ftdi_sio 5-8.2:1.1: FTDI USB Serial Device converter detected
[ 14.330602] usb 5-8.2: Detected FT2232C
[ 14.337041] usb 5-8.2: FTDI USB Serial Device converter now attached to ttyUSB1
Installiere das EnOcean Binding und schau, ob Du in der Main UI die beiden seriellen Schnittstellen auswählen kannst. Ist das nicht der Fall, müssen wir erst noch dafür sorgen, dass die Schnittstellen in openHAB zur Verfügung stehen (was kein großes Problem ist).
openHAB4.3.3 stable in einem Debian-Container (bookworm) (Proxmox 8.3.5, LXC), mit openHABian eingerichtet
-
Fabse1988
- Beiträge: 22
- Registriert: 10. Feb 2023 21:40
Re: Enocean und das Große Fragezeichen ???
Probiere ich dann direkt heute Abend mal aus. 
